This project by Groupe Millet, a leading industrial carpentry company, forms part of an ambitious plan to significantly expand its warehouse near Bressuire, France. The structure of the new building with an area of 1,800 m² (19,375 ft²), called Extension M2, is primarily intended to enhance the company's operating capacities. GH Hervouet designed, manufactured, and assembled the steel frame, as well as the roofing and cladding components.
A slender, elegant bridge for pedestrians and cyclists connects the old town and the hospital town of the large district town of Eichstätt, Germany. This customer project was awarded with the "Bavarian Engineering Award 2023" and the "Ernst & Sohn Engineering Construction Award 2024" – and rightly so, because it really is something special.
A particularly exciting customer project is the high-speed toll station by Jiangsu Jingong Space Structure Co., Ltd. In this project, a membrane is supported by an innovative arch truss, which has an interesting appearance and also special properties.
The transition to more sustainable energy sources is a global priority today. In this sense, the construction of a multi-energy station in Les Sables-d'Olonne, in the Vendée department (85), is an innovative and promising project. This station, consisting of three canopies with a height of 7.5 m (24.5 ft) and a total length of 40 m (131 ft), represents a significant investment to promote low-carbon mobility and local green energy. GH Hervouet, a customer of Dlubal Software, was responsible for the entire project, including carpentry, roofing and cladding.
As part of the urban development of Metz, a new gymnasium is under construction, featuring advanced engineering techniques and a commitment to sustainability. The project combines LC spruce GL24h cross-beams, steel columns, and insulated concrete precast walls to ensure the stability of the structure. The timber roof structure serves as a support for the photovoltaic panels. BET Moselle Bois, a customer of Dlubal Software, was responsible for the structural analysis and design.
Engineer Enrique de León, a Guatemalan Dlubal Software customer, presents a beautiful steel pergola project by which a rarely used space has been renovated in the 'L' building of the San Francisco de Borja SJ campus at the Rafael Landívar University in Guatemala City.
This project deals with structural evaluation against climatic loads and the utilization and seismic analysis of an existing telecommunications tower performed by SAQQARA INGENIERIA S.L., a customer of Dlubal Software. The structure is a lattice tower with a square section plan, made of steel cross-sections, with a radar and the necessary auxiliary equipment installed on it, including a spherical radome as a mimicry.
This project is about the construction of an elevator shaft to replace the existing staircase and provide access to the underpass. The shaft was made of surface components consisting of reinforced concrete, ensuring its stability and durability with control of cracking at the same time.
Quai M, which is the name of the new concert hall, opened in September 2022 and includes two halls for concerts as well as rehearsal and recording rooms. The project replaces the city's old "Fuzz'Yon" concert room, providing a new and modern space for music.
Madergia, a Spanish Dlubal Software customer, presents this beautiful project designed by ZÜR Studio, for which engineers were responsible with regard to the structural analysis, manufacturing, supply, and installation of the timber structure. It is a pergola roof with folded plates, placed in an open public space in the town of Anoeta.
The stand-alone program RWIND allowed Davide Prando (architect) and Marco Rota Nodari (engineer) to optimize the project, highlighting some critical locations on the buildings' surfaces, due to the high positive and negative pressure values encountered.
The German "Digital Timber Construction" (DTC) Lab headed by Prof. Dr. Christopher Robeller has recently completed an impressive showcase of its research activities. It is a lightweight and environmentally friendly timber gridshell, which is part of the "Timber Structure Interface" (TSI) research project, built in Moritzplatz in the city of Augsburg, Germany.
With the design of the BSH20 A "Stories" building, Dlubal customer PIRMIN JUNG has taken the classic apartment building to a new level. Due to the innovative use of cross-laminated timber, this customer project has a very special appeal, which fits remarkably yet harmonically into the cityscape of Amsterdam. A really interesting and beautiful building structure.
This is a research and development project with the long-term goal to design a circular timber house that is energy-efficient and provides excellent living comfort using a rotation system according to the sun's position.
This project aims to rehabilitate, extend, and enhance the former Haras ice rink, located near the Château d'Angers, a castle in the city of Angers, belonging to the ABF sector (Architectes des Bâtiments de France). The aim is to create a modern sports facility that meets the needs of the local community while preserving the existing architectural heritage.
After its creation in 2022, the second edition of the Festival des Cabanes at the Villa Medici in Rome takes place from May 24 to October 1, 2023. Throughout the summer, it offers architects, artists, and people interested in art and culture the opportunity to visit the exhibition in the historic gardens of the Villa Medici. One of the seven cabin projects has benefited from the intervention of Atelier PoCo, a French customer of Dlubal Software, for its design and technical study.
A developer project of 121 apartments in 2 identical buildings for rent with an area of 53,820 ft² each, designed by CIP ARQUITECTOS SL, was built by the construction company ACR in just 13 months of construction, including earthworks, foundations, and basement, using the industrialized Steel Framing system by AFCA Teccon, a customer of Dlubal Software.
Our client, Maderas Besteiro, was in charge of drafting this emblematic project (structural analysis and design), involving the manufacture of all pieces, a numerical control, subsequent treatment, and finally, assembly management.
At Metalúrgica Vera SRL, a metalworking company in Paraguay, metal structures are manufactured and assembled for various projects. One such project is the Velodrome, a sports facility prepared for cycling competitions.